By Clip and Go Agility
When using Clip and Go Sliding Jump Cup Strips you are building the safest jump possible because there are no extra cups on the jump standard that the dog might hit. These jump cup strips are made of tough and flexible UV-stabilized polypropylene plastic. The sun won't hurt them and they'll stay flexible even in the coldest temperatures.The jump cups can be set at heights every 1" from 4" to 12", and every 2" from 14" to 30". The outside side of the strip has molded in height numbers and you'll also receive a set of weather-proof number strips to label the PVC upright itself. The Clip and Go Sliding Jump Cup Strips can be attached to 1" or 1 1/4" PVC jump standards, and they can be used with winged and wingless jumps. Note: If you are retrofitting an existing jump and the end caps are glued in place, you will need to remove the end caps or cut them off. Included with each pair are screws, 4 sliding jump cups suitable for 1" PVC, 4 sliding jump cups suitable for 11⁄4" PVC, and a set of Clip and Go number strips. Pole shown in illustration not included.